Type 3 Barricades

Plasticade Break-Away Type 3

plasticadebreakawaytype3

All plastic, Collapsible, lies flat for storage and transport. Available with five board lengths, 1″x 8″ boards, 4′, 6′. 8′, 10′, or 12′ long. Easier to transport, install, and store than wood or steel Type III Barricades. Boards are available sheeted (one or both sides) or unsheeted. Attach two flashing lights, sold in kits with hardware included or as component parts. NCHRP-350 Accepted, Meets MUTCD Standards.


Plasticade Telespar® Type 3

plasticadetelespartype3

Two Options Available, Telespar® uprights with Telespar® feet; Telespar® uprights with Angle Iron feet. Telespar® is galvanized for superior corrosion protection,14 gauge, hot rolled high carbon steel. Angle iron feet are 12 gauge, mill finish. Universal mounting holes, pre-punched 7/16”. Square shape provides superior wind load capabilities and inhibits warping. Quick removal of uprights from feet, allows for short term or permanent placement. Easy to assemble and replace parts if necessary. Plastic 1″ x 8″ boards are available in 4’, 6’, 8’, 10’, and 12’ lengths. Boards may be sheeted (on one or both sides) or unsheeted. Accepts two flashing lights. NCHRP-350 Accepted, Meets MUTCD Standards.


Power Post™ Type 3

powerposttype3

Strong and Durable Plastic Square Tube Type III Barricades, Plastic posts save you time and money! Easier to handle and set up and break down goes faster. Lightweight but strong, -67% lighter than steel square tube posts. Impact resistant, No rust or corrosion. Use with Telespar® or Angle Iron feet. Quick removal of uprights from feet, allows for short term or permanent placement. Easy to assemble and replace parts if necessary. Polymer post is 63″H x 1.75″W, weight 3.25 lbs. NCHRP-350/MASH Accepted, Meets MUTCD Standards.


Plasticade Sentinel Type 3

plasticadesentineltype3

All Plastic Type III Barricade – Easy to Assemble, Snaps Together. Base consists of 2 pieces, upright and base, that snap together, no hardware required. Available with two board lengths, 1″ x 8″ boards, 4′ or 6′ long. Boards can be purchased sheeted (on one or both sides) or unsheeted. Base can be internally ballasted with sand, sandbags, or water in warmer climates. NCHRP-350 Accepted, Meets MUTCD Standards.


Plastic Safety Type 3

OLYMPUS DIGITAL CAMERA

 

Durable, Lightweight, Feature-Laden. The Anchor Type III Barricade System is the most innovative, feature-laden system on the market today. NCHRP-350 certified and MUTCD compliant, Anchor Barricade has earned many FHWA Acceptance (WZ) Letters. Anchor Barricade is blow-molded from high density polyethylene (HDPE) plastic, with UV stabilizers. Anchor Barricade is made of three components: Anchor® Base, The Mast Upright, Wave Centerboards. Anchor Barricade is available in complete units or as components. For added versatility, hollow extruded uprights are available in 5′ or 7′ heights. Also, plain extruded center boards are available in 4′, 6′, 8′, 10′ and 12′ lengths.

Also available is the Anchor® Type III PSST Uprights which can allow you to utilize your existing steel upright inventory. “Anchor 60” and “Anchor 48″ bases are also manufactured for 1 3/4″ PSST uprights and other 1 3/4” metal or plastic uprights. These PSST versions are otherwise identical to the plastic upright versions. Enjoy the same fast press-fit installation with PSST as with plastic uprights. Use our LFM Accessory to easily install warning lights and flags.


Cortina Type 3 System

cortinatype3system

The Cortina Type 3 Barrier is built from other Cortina Products that make the M-cade barrier and use A-frames and Cortina I-Beam Panels. With the materials that create this Type 3 you can also have Type 1 and Type 2 Barricade uses.



 

Questions?

If you have a question on a product or are wanting something you do not see online give us a call. We may not have every product we carry online yet, or you may need something that a supplier can custom fabricate.

Skip to toolbar